Kern-sohn RFB Manuel d'utilisateur

KERN & Sohn GmbH Ziegelei 1 D-72336 Balingen E-Mail: [email protected] Phone: +49-[0]7433- 9933-0 Fax: +49-[0]7433-9933-149 Internet: www.kern-

RFB-BA-e-1211 10 3.3 Warranty Warranty claims shall be voided in case Our conditions in the operation manual are ignored The appliance is us

RFB-BA-e-1211 11 5 Transport and storage 5.1 Testing upon acceptance When receiving the appliance, please check packaging immediately, and

RFB-BA-e-1211 12 Do not expose the device to extreme dampness for longer periods of time. Non-permitted condensation (condensation of air humidity

RFB-BA-e-1211 13 6.2.1 Placing Assembly description:  Place the balance on a firm, level surface 7 Place the support of the weighing plate on

RFB-BA-e-1211 14 6.2.2 Pressure compensation screw: On the lower side of the balance there is a pressure compensation screw [1] which has to be op

RFB-BA-e-1211 15 6.5 Battery power supply Before the first use, the battery should be charged by connecting it to the mains power supply for at lea

RFB-BA-e-1211 16  Remove the rechargeable battery cover  Connecting the rechargeable battery Watch the colours: Red on red !

RFB-BA-e-1211 17 6.5.2 Mains connection during rechargeable battery operation During the rechargeable battery operation ensure that the mains conn

RFB-BA-e-1211 18 6.8 Adjustment As the acceleration value due to gravity is not the same at every location on earth, each balance must be coordinate

RFB-BA-e-1211 19  Use the numeric keys to enter password „0000“  Actuate adjustment switch on the lower side of the balance (see chap.6.9.1) 

RFB-BA-e-1211 2 GB KERN RFB Version 1.1 01/2012 Operating instructions Price calculating balance Contents 1 Technical data ...

RFB-BA-e-1211 20  Wait for the appearance of the triangle over the stability display , then place the adjustment weight  Confirm with The ad

RFB-BA-e-1211 21 Verification notes: An EU type approval exists for balances described in their technical data as verifiable. If a balanc

RFB-BA-e-1211 22 6.9.1 Position of seals and adjusting switch After a verification the balance is sealed at the indicated positions. 1 Self-des

RFB-BA-e-1211 23 7 Operation 7.1 Switch on/off and set zero Operation Display Switch on balance  Press The balance will carry out a self-test A

RFB-BA-e-1211 24 7.2 Simple weighing Operation Display  Place goods onto weighing plate Read weighing result If weighing values are stable the t

RFB-BA-e-1211 25 7.3 Weighing with taring The dead weight of any weighing container may be tared away by pressing a button, so that the following w

RFB-BA-e-1211 26 7.4 Weighing units switch-over Operation Display  Press for approx. 3 sec. If „kg“ is selected, press the button, the disp

RFB-BA-e-1211 27 7.5 Background illumination The balance has three background illumination settings: Auto Automatic background illumination on when

RFB-BA-e-1211 28  Use to take over the selected setting, the balance changes into the weighing mode An other possibility to adjust the backgrou

RFB-BA-e-1211 29 Operation Display  Start balance by pressing  While the balance carries out a self test, press .  Use to switch between

RFB-BA-e-1211 3 7 Operation ... 23 7.1 Switch o

RFB-BA-e-1211 30 7.7 Weighing with price determination As soon as the goods to be weighed are placed on the balance and the basic price has been set

RFB-BA-e-1211 31 7.7.2 Saving and calling up a basic price The balance is able to save up to 4 PLU values as basic price. The PLU value may be s

RFB-BA-e-1211 32 Invoking a basic price via the PLU buttons: Operation Display  Place the material which will be weighed  Press ~ button „LOA

RFB-BA-e-1211 33 7.8 Determining the price per number of items To calculate total price, enter basic price / number of items (pocket calculator func

RFB-BA-e-1211 34 8 The menu In the menu the settings of the balance can be modified and functions can be activated. This way, the balance can be adju

RFB-BA-e-1211 35 Exit menu and return to weighing mode  Use to return from the submenu item to the main menu item  Press again to exit the m

RFB-BA-e-1211 36 F6 rE ZEro rE 2 Manual zeroing range: 0 / 2 / 4 / 10 / 20 / 50 / 100 F7 trACK Zero AZn Track zero range: 0.5 d / 1 d / 2 d / 4 d F8

RFB-BA-e-1211 37 10 Service, maintenance, disposal 10.1 Clean  Before cleaning, please disconnect the appliance from the operating voltage.  Kee

RFB-BA-e-1211 38 11 Instant help In case of an error in the program process, briefly turn off the balance and disconnect from power supply. The weigh

RFB-BA-e-1211 4 1 Technical data KERN RFB 3K1IPM RFB 6K2IPM RFB 15K5IPM Readability (d) 1 g 2 g 5 g Weighing range (max) 3 kg 6 kg 15 kg Minimum lo

RFB-BA-e-1211 5 2 Device overview 1 Verification wire 2 Battery compartment 3 Connection of mains adapter 4 Pressure compensation screw

RFB-BA-e-1211 6 2.2 Overview of display Operator display balance: Weight Basic price Sales price

RFB-BA-e-1211 7 Secondary display on customer side: Weight Basic price Sales price 2.2.1 Display weig

RFB-BA-e-1211 8 2.3 Keyboard overview Selection Function in weighing mode in menu Turn on/off - Zeroing key: Balance zeroing Invoke function

RFB-BA-e-1211 9 Selection Function in weighing mode in menu Saving and invoking the four PLU values - Switch-over buttons €/kg or €/100g -