Kern-sohn KFE-TM Addendum Manuel d'utilisateur télécharger pdf (Page 9)

Procedure:

Ö Call-up menu setting , see chap. 1.

Ö Acknowledge with .

Ensure that there are no objects on the weighing plate.

Ö Wait for stability display „STABLE“, then press . When

“LoAd 1“ is displayed, put the first adjustment weight (1/3

max) carefully in the centre of the weighing platform.

Ö Wait for stability display „STABLE“, then press . When

“LoAd 2“ is displayed, put the second adjustment weight (2/3

max) carefully in the centre of the weighing platform.

Ö Wait for stability display „STABLE“, then press . When

“LoAd 3“ is displayed, put the third adjustment weight (1/3

max) carefully in the centre of the weighing platform.

Ö Wait for stability display „STABLE“, then press .

Ö After the adjustment the balance will carry out a self-test.

Remove adjusting weight during selftest, the appliance will

return into weighing mode automatically.

An adjusting error or incorrect adjusting weight will be indi-

cated by the error message; repeat adjustment procedure.

KFE-TM-ZB-def-1110 9

1 2 3 4 5 6 7 8 9 10 11 12 13

Pas de commentaire

Kern-sohn KFE-TM Addendum Manuel d'utilisateur Page 9